12 Comments

  1. joey

    The battery door PRO and CON is a contradiction… the battery door is excellent, I own 2 of these MODs .

    And I don’t understand, CON number 3? “If use the pre-installed 0.9 ohm coil under 40 watts or up, may have a burning taste” , it sounds like you’re saying You HAVE to use it at EXACTLY at 40 watts. Definitely not true, I use my 0.9 between 25W and 40W ( usually 30W) and its perfect. I’m actully using it at 26W RIGHT NOW as I leave this comment and its PERFECT, with alot of vapor. I’ve used it up to 50W with no burning taste…

    IT SEEMS LIKE THEY TOLD YOU TO PUT DOWN AT LEAST 3 CONS FOR THE REVIEW AND YOU COULDNT FIND ANY, SO YOU WROTE RANDOM SH**
    This mod is EXCELLENT for an upper-mid-grade vapor.

    Btw…..the tank is AWESOME on this, thanks to the full cCELL Coil

    Reply
  2. joey

    I forgot to write in my last comment that an actual CON for this would be that its supposed to automatically change from wattage mode to temperature control mode when using a Ni200 coil. IT DOESN’T !!!! You have to manually change it, which is definitely a CON, considering it’s SUPPOSED to AUTOMATICALLY change.

    Reply
  3. Robert

    Here’s my only complaint the .9 kanthal coils are rated for 20-35 watts but anything above 30 on the pre-installed coil gives off a burnt taste. The mod is great fitting and zero leakage from the tank just hope they come out with a lower ohm coil setup for wattage mode. 75 watt mod I’d like to be able to use more of the power.

    Reply
    1. 3FVape 3FVape

      The ouput power is designed too high for the pre-build coil, mey be it’s designed for you to use other atomizers on. Would like to keep an eye on any update of the ceramic cCell coil. Will update if anything new.

      Reply
    2. andy

      Exactly!!! What lies that this coil tastes great…all im gettin is a burnt taste when i go above 25 watts!! I primed the coil and let it sit 20 mins and still if i take a big hit (like i usually do) all i get is a burned nasty taste…these are utter dogsh*t and i shouldn’t have let the idiot in the shop convince me to not buy another kanger sub tank mini…these are awful awful awful the juice cannot fill back into the coil quick enough for you to take a nice lung hit…absolutely feel ripped off!!!!!! Kanger all the way ceramic is shite

      Reply
      1. Robert

        Was told to try a thinner juice say 50/50 because the thicker juices don’t get into the pourus ceramic quick enough. Personally I’ll stick w my kanger nano tank.

        Reply
      2. Jason

        Absolutely spot on comment. I have the same problem. The ceramic can not absorb the liquid fast enough to maintain flavor. You pull a burnt version of how good it should be constantly even with a new coil that sits with prime.

        Reply
        1. 3FVape 3FVape

          The ceramic absorb the liquid as usual. And the frequncy of changing an new coil is according to usage. Thank you.

          Reply
          1. Bianca

            Did an 8-year-old write this comment for you?

            And by the way, the ceramic coil “absorbing as usual” doesn’t make any difference if it’s “usual absorption” isn’t quick enough. Duh.

  4. Scott

    I have the kit and after a week it leaks from the bottom of the tank and the led screen fraps out and won’t shut off cause tremendous heat to build up. Such a waste of money. I’ll be calling the manufacturer tomorrow because I’m done with this POS. Do not buy this at all. Trust me

    Reply
  5. Jack

    ccell kanthal coils have a burned taste. say what you like – they are shit. fraud!

    Reply
    1. 3FVape 3FVape

      Ceramic coil needs fully soak of the e-juice. I admit that some people do reported the burned taste of ceramic coil. Pity that you don’t like the vaporesso desgin and this is authentic vaporesso target, I get to know some people drip some juice directly on the coil top and wait about 2 minutes for soaking. And they try a shorter puffer, and helps. Thank you for your opinion.

      Reply

Leave a Reply to Scott Cancel reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>