As an MTL fan, asMODus ANANI MTL RTA V1 had left me a good impression of usage feeling.
I was so excited when the new generation has been released — asMODus ANANI MTL RTA V2.
Will the new generation be any better? Or has it gotten worse? What exactly are the differences? etc.
Today I will make a product review. Let’s explore it!
Introduction
The authentic ANANI V2 RTA by Asmodus, a single coil rebuildable tank vape atomizer geared for nicotine salt, it comes with 2.0ml e-juice capacity PEI tank, top filling system design and threaded airflow diffuser. Made of stainless steel, this MTL tank is more impact-resistant. the Anani V2 RTA is an MTL tank made take full advantage of your regulated devices that have been shelved. Under the build deck is a large juice reservoir that allows the juice to flow effortlessly to the 2 bored out holes on the build deck. Forged of stainless steel alongside with ultem, the Anani V2 MTL RTA has more impact-resistant build for us clumsy vapors.
Speicifaction:
510 threading connection
Capacity: 2.0ml
Top Refilling System
Threaded airflow diffuser from bottom
Outer Diameter: 24.5mm
Compatible with 510 sized drip tips
Easy to build dual-post build deck
Spacious Build Deck: Sits Atop Juice Reservoir
Dual-Post Build Deck: Single Terminal Per Post
Outputs Airflow in Circular Multihole Layout
Knurled ULTEM Top Cap
Knurled Base and Chimney
Non-adjustable bottom airflow design, single inlet
Structure Details
1. Smaller body
With a diameter of 22mm for the ANANI RTA V2 and 24mm for the asMODus ANANI RTA V1, the V2 will look more concise and smaller.
2. 510 drip tip
The ANANI RTA V1 uses a regular threaded top cap. The Asmodus Anani V2 top cap is made of metal. The 510 drip tip will be pressed on top of the top cap. The new top cap is smaller and makes the whole connection look more pointed, rounded and harmonious!
3. Upper Oil Tank
The V2’s upper compartment is divided into two parts, the atomizing compartment and the oil storage compartment, which can be opened from the middle. It does not need to be opened for daily use, but only for cleaning.
4. Base
The V2’s base is tapered closed in three layer. The advantage is that the small size of the atomizer compartment allows for a higher density of smoke than the V1’s.
5. Inner chamber
Overall, the ANANI RTA V2 looks very similar to the ANANI RTA V1, but the V2 will be slightly smaller than the V1.
As can be seen in the pictures, the depth of the oil blocking cotton and the oil reservoir will be deeper in V1. So we can juice well!
6. Air inlet Position
The air inlet size of V2 is slightly smaller than V1, with the difference being that V2 has a single adjustable air inlet as well as a bar inlet. The V1 only has a non-adjustable air inlet.
The Asmodus Anani V2 has better fusion and resolution.
V2’s intake hole is a little more down from the heating wire and V1’s intake hole will be more down, in other words, V2 will have better fusion and resolution.
How should this be interpreted?
On the one hand, the closer it leans up to the heating wire, the less airflow diffusion in the middle of it, the smaller bubbles will hit, so the intensity will be higher. After the air diffuses in the middle, the V2 can make the heating wire more easily due to a more suitable distance. On the other hand, along with a better air circulation, the resolution will be improved.
Wire and Cotton Installing
1. Wire
Since the electrode post openings on both sides are concave, you only need to snap the heating wire to the bottom.
The screws on the electrodes on both sides are larger enough that help to prevent snap the wire when unscrewing.
The location of the heating wire for the air inlet hole, we just need to mount it flat. The space and position reserved at the bottom, no need to lift, this step is very user-friendly.
2. Cotton
Choosing the appropriate amount of cotton, you don’t need to reserve too long on the two sides, just keep the length of cotton the same as the build deck’s diameter. And then put the cotton tip down.
Using Experience
1. The V1 and V2 air intake holes are completely different.
The former have a tighter air intake hole and unadjustable. The latter’s intake hole is adjustable, but the suction resistance will be slightly larger than the former.
Both air inlets are set to the small hole, the airflow will still be slightly smaller than the V1; if set to the large hole, the V2 air intake will be larger, and the smoothness of the suction will be higher than the V1.
2. The V2 has better experience in using long nozzle.
The V2 uses a long nozzle, and with a long nozzle the concentration will drop, the resolution will go up, the bubbles won’t be as strong, and the heat dissipation will be better than the V1’s short nozzle.
3. Low Oil leakage
Both perform well in terms of frequency of oil leakage, which is unimaginable low!
All four colors of asMODus Anani V2 MTL RTA:
 asMODus Anani V2 MTL RTA – Silver |
 asMODus Anani V2 MTL RTA – Gold |
 asMODus Anani V2 MTL RTA – Matte Silver |
 asMODus Anani V2 MTL RTA – Black |
| BUY IT NOW↗ | BUY IT NOW↗ | BUY IT NOW↗ | BUY IT NOW↗ |
Recommended Wire Coil:
Coilology Pre-built MTL Alien Wire Coil(10 PCS) 
Vandy Vape Superfine MTL Fused Clapton Wire Coil(10 PCS)
Vandy Vape Ni80 Superfine MTL Fused Clapton Heating Resistance Wire(10 Feet)Recommended High Quality Cotton:
AVCTVape 20 PCS Shoelace Vape Cotton + 4 PCS Ordinary Cotton – 100% Organic Cotton 
Wotofo Agleted Organic Cotton for Coil Wicking(30 PCS)
Vapefly Firebolt Pre-loaded Cotton – 20 PCS
FOLLOW US
