Twenty airflow options – SXK VMM Imperia Style RTA Review

Hello, my dear vapers! Have you been worried about finding a RTA which provide multiple choose to control airflow? If you are, this is exactly what you want — SXK VMM Imperia Style RTA support incredible twenty different airflow options!! Let’s have a look.

Overview

The SXK Imperia Style RTA is constructed from 316 stainless steel and in 22mm diameter. The glass tank holds 5ml capacity and top refilling system. The SXK Imperia Style RTA is with 6 airflow options 1.6mm / 1.8mm / 2.0mm / 2.2mm / 2.4mm / 2.6mm (With the default preinstalled Air plate). The RTA supports fully adjustable 510 base at 24 different sides (For atty – mod precise alignment)

44951 (1)

IMG_4059

Specification:

– Depth, 22mm; Height, 35mm; Width, 22mm
– 510 drip tip
– 22mm diameter cotton atomizer
– Made from 316 Stainless Steel
– Extra reduced evaporation chamber
– Fully adjustbale 510 base at 24 different sides(For atty – mod precise allignment)
– 20 different bottom airflow options possible including the 2 extra available Airplates
– Comes with a small bag of spare O’rings & screws

Highlights

1. Recessed build deck & very easy deck access

Removing the deck, from the opened position turn as far as to just close the liquid control hole, then pull it out. Deck access havs never been so easy and simple.

44933+44951 (3)

And then use a screwdriver to screw out the chimney first and then take out the glass tank, as the video below show.


2. Wonderful twenty airflow options!! (with SXK VMM Imperia Style RTA Replacement DL/MTL Airflow Inserts Air Plates(2 PCS))

That’s the most exciting part of the SXK Imperia Style RTA. You can change 20 airflow ways by adjusting Airflow Inserts Air Plates!!

You can easily remove the airplate by pushing it upwards while rotating it. It is too tight, you can use a pair of tweezers to take it out. Place the airplate back on with the numbers facing upside down. And then you can choose the default preinstalled Air plate or Replacement Air plate.

44933+44951 (6)

44933+44951 (2)

44933+44951 (4)

 SXK VMM Imperia Style RTA+

 SXK VMM Imperia Style RTA Replacement DL/MTL Airflow Inserts Air Plates(2 PCS)

Default Airflow Inserts Air plate:
6 airflow options 1.6mm / 1.8mm / 2.0mm / 2.2mm / 2.4mm / 2.6mm (With the default preinstalled Air plate)

Replacement Airflow Inserts Air Plates(2 PCS)
– MTL airplate: 0.8mm / 0.9mm / 1.0mm / 1.1mm / 1.2mm / 1.3mm / 1.4mm / 1.5 mm (8 airflow options starting from strict MTL to loose MTL);
– Multi air plate: 3 x 0.9mm / 3 x 1.1mm / 2 x 1.6mm / 2 x 1.8mm / Plus 2 more RDL & DL Slots (6 airflow options for loose MTL to DL)
44933+44951 (1)

3 different airplates are available.

Other Accessories

44932+44951+44933 (2)

44932+44951+44933 (1)

 SXK VMM Imperia Style RTA + 

Replacement Short Ultem Tank Tube + SS Chimney + 510 Drip Tip + 

Replacement DL / MTL Airflow Inserts Air Plates(2 PCS)

3. Mod/atty alignment tips
In some situation mod/atty alignment may not be convenient because of the airplate position. We can move the atty to a more convenient place via the 24 different sides inside the base.

Loosen the base screw just a bit(no need to completely remove it). Pull tthe base up and then turn it accordingly. Push it back when the desired position is reeached. You can use the engraved serial at the bottom as a refference point of the direction and how far you need to rotate the base. The 24 sides inside the base provide us 24 different positions(rotation by 15° each time). The airplate is now accessible and aligned with the center of our mod.

IMG_4066

with Vapeasy Armor Mech V2 Style BF Bottom Feeder Squonk Mechanical Box Mod

IMG_4064

with Avid Lyfe Fast Twist Gyre Style Mechanical Box Mod

SXK VMM Imperia Style RTA & Replacement Accessories:

SXK VMM Imperia Style RTA SXK VMM Imperia Style RTA Replacement Short Ultem Tank Tube + SS Chimney + 510 Drip Tip - Brown, 2.5mlReplacement Short Ultem Tank Tube + SS Chimney + 510 Drip Tip – Brown, 2.5ml Replacement DL / MTL Airflow Inserts Air Plates(2 PCS)Replacement DL / MTL Airflow Inserts Air Plates(2 PCS)
BUY IT NOW↗ BUY IT NOW↗ BUY IT NOW↗

 

Mechanical Mod Recommend:

Vapeasy Armor Mech V2 Style BF Bottom Feeder Squonk Mechanical Box ModVapeasy Armor Mech V2 Style BF Bottom Feeder Squonk Mechanical Box Mod Avid Lyfe Fast Twist Gyre Style Mechanical Box ModAvid Lyfe Fast Twist Gyre Style Mechanical Box Mod
BUY IT NOW↗ BUY IT NOW↗

Replacement Cottom maybe you like:

Advken Doctor Coil Pre-loaded Cotton Wick for RDA / RTA / RDTA - 50 PCSAdvken Doctor Coil Pre-loaded Cotton Wick for RDA / RTA / RDTA – 50 PCS Wick 'N' Vape Cotton Bacon Prime for E-Cigarettes - 0.35 Oz (10g)Wick ‘N’ Vape Cotton Bacon Prime for E-Cigarettes – 0.35 Oz (10g) Vapefly Firebolt Pre-loaded Cotton for E-cigarette - 20 PCSVapefly Firebolt Pre-loaded Cotton for E-cigarette – 20 PCS Wotofo Agleted Organic Cotton for Coil Wicking - 60mm x 3mm (30 PCS)Wotofo Agleted Organic Cotton for Coil Wicking – 60mm x 3mm (30 PCS)
BUY IT NOW↗ BUY IT NOW↗ BUY IT NOW↗ BUY IT NOW↗

Replacement Coils maybe you like:

Wotofo Fused Clapton N80 Pre-built Coil - 0.5 Ohm, 26GA + 38GA (10 PCS)Wotofo Fused Clapton N80 Pre-built Coil – 0.5 Ohm, 26GA + 38GA (10 PCS) Vandy Vape Ni80 Superfine MTL Fused Clapton Heating Resistance Wire - 30GA x 2 + 38GA, 3.5 Ohm / Ft, 3m (10 Feet)Vandy Vape Ni80 Superfine MTL Fused Clapton Heating Resistance Wire – 30GA x 2 + 38GA, 3.5 Ohm / Ft, 3m (10 Feet) Vandy Vape SS316L Superfine MTL Fused Clapton Heating Resistance Wire - 30GA x 2 + 38GA, 2.37 Ohm / Ft, 3m (10 Feet)Vandy Vape SS316L Superfine MTL Fused Clapton Heating Resistance Wire – 30GA x 2 + 38GA, 2.37 Ohm / Ft, 3m (10 Feet)
BUY IT NOW↗ BUY IT NOW↗ BUY IT NOW↗
SHARING
Facebooktwittergoogle_plusredditpinteresttumblrmail

FOLLOW US
Facebooktwittergoogle_pluspinterestyoutubetumblrinstagram




2 Comments

    1. 3FVape 3FVape

      More recommend roulette rta, it’s cost-effective.

      Reply

Leave a Reply to Babylon Cancel reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>