Today we are going to review on the Pico Style RTA on 3FVAPE. This RTA comes with 2 tanks, one PEK tank (transparent) and one PEI tank (yellow). Stainless steel constructed, this RTA has a good build quality. This pico style RTA has a 3mL capacity tank and can be top refill. Air flow adjustable design brings you different amount cloud and taste. Simple construction and easy to use.
Let’s start with some pics. This RTA doesn’t comes with a drip tip. I used an acrylic drip tip on and you can choose you own from 3FVAPE, drip tips starts from $0.49: http://www.3fvape.com/22-drip-tip
Following we are going to do a comparison between the authentic Pico RTA and the 3FVAPE Pico Style RTA 
The authentic one only comes with an atomizer, you need to buy other spare parts if you want. The 3FVAPE one has a PEK Tank one atomizer and a spare PEI tank, also, together Joyetech CLR coil deck for joyetech ego clr coil setting.
The transparent tank is made of peek and the yellow one is made of PEI (Polyetherimide), PEI has a good stability and very resistant to heat, abrasion, acids,alkali and high temperature. As we all know acrylic is not that friendly to pure VG juice. But when you use this PEI tank , you can use high VG e-liquid. The PEI TANK is available on 3FVAPE with only $9.99: http://www.3fvape.com/misc/7489-replacement-tank-for-pico-rta-yellow-pei.html
It is hard to tell the difference between the authentic pico RTA and the 3FVAPE one as they share the same good polishing and body build. If you are sure your coil build is good but your mod keeps showing “checking atomizer” please make sure you screw the chimney tight to the base. As the rda deck is fixed with the chimney.
It’s very surprising that it’s hard to teel difference between the authentic Pico RTA and the clone one. Even comparing the detail parts.
The chimney is made of peek, the screw is nice, not very hard to screw out but also has a good connection to prevent leaking.
It’s hard to tell if this Pico RTA can beat the Kayfun or other atomizer on taste, but it’s short body and short air flow brings you a strong taste of the juice. Though it has only 3ml capacity, but it can be easily top refilled. You may find it a little hard to build your coil, as the connector is not fixed on the deck and it may slip.
Get the Pico Style RTA on 3FVAPE at only $23.99
 |
| BUY IT NOW↗ |
FOLLOW US
Permalink
its been awesome using 3Fvape products.
Permalink
Hye there.
How can i get this tank?
Can u post it to Malaysia?
Permalink
http://www.3fvape.com/home/7023-pico-style-rta-rebuildable-tank-atomizer-silver-stainless-steel-pei-pek-3ml-22mm-diameter.html
3FVAPE offers this RTA free shipping to Malaysia by China Post Air Mail, if you want this item shiped via express shipping, contact service@3fvape.com to calculate the shipping fee. Thank you.
Permalink
what is the material of the coil deck wall and chimney?
Permalink
Peek
Permalink
hye there, where do you buy the authentic pico? thanks.
any vapor and flavor differences between 3F and the authentic pico?
Permalink
304ss or 316ss?
Permalink
The 3FVAPE Pico Style RTA, model:7023 is made of 316 stainless steel.
Permalink
The one part not shown is the one that’s clearly way off. The clr adaptor top. It isn’t long enough. Clearly the clr top chimney adaptor was not clones properly.
Permalink
Thank you for your information, I haven’t test the clr adaptor when using it. Will update if I have the information confirmed.
Permalink
Hello, May I know how to fix leaking juice inside my air hole?
I’ve been experiencing 3 times of leaking juice and I have’nt had any ideas how to fix it
Permalink
Try replace the o-ring to see if it helps.
Permalink
Bought 1 from a local vendor.. vapes fine but it always leak on me.. both from airholes and 510 pins.. need help.. i really love this atomizer but it keeps on leaking..
Permalink
Rebuild the coil. Use the cotton to block the oil leading hole. try if any o-ring can help.
Permalink
I have pico-s tank, but it always leaking everywhere trough airhole in the bottom, any advice to fix this?
My local store told me the different (if pico has chamber hole at the top, but the pico-s has chamber hole on bottom, and the top chamber does not screw model, it just with seal with o-ring)
iam very desparate right now.. i try to give the hole chamber full off cotton to block the liquid but, still leaking.. pls help me guys…
Permalink
Try to change the o-rings on the building deck.
Block the filling hole when filling.
Didn’t try pico-s, not much to help. sorry.
Permalink
thanks for the advise, i will check all the o-ring first, couse i think all o-ring has been tide at the tank.. thank you.. sorry if my english are bad
Permalink
You are welcome.
English is not my first language too.
Permalink
Can the clone parts be used on an authentic pico?
Permalink
Pico yes. Pico – s no idea.
Permalink
Which manufacturer makes this clone?
And why is it unavailable now?
Permalink
Which manufacturer makes this clone?
Why has it become unavailable ?
Will it be back in stock ever?
Permalink
The demand doesn’t meet the MOQ of this manufacturer and they are now manufacturing new items so the possibility this item back to stock is small.
Thank you.
Permalink
This happens way too much. You need to tell the manufacturers it takes time for the word to get out. If you got these back in I’d buy two and have three friends who would buy ten between them. They can’t expect everyone to learn there’s a good clone so quickly. Too many bad clones now makes people less likely to buy right away until user reviews come in. Right now by the time good user reviews come in they don’t make it any more.
Permalink
please tell me, this product pico 3FVape will be in your presence? if yes, then when ? really I want to buy it
Permalink
You can subscribe the notification. Once it’s in presence you will get a email notification.
Permalink
please tell me, this product pico 3FVape will be in your presence? if yes, then when ? really I want to buy it )
Permalink
So far out of stock, you can subscribe the notification. Once it’s in presence you will get a email notification.
Permalink
The find ring thing here is the authentic tic probably uses heat resistant material for the surround on the deck. The d,one probably uses bog standard cheap plastic with all kind of carcinogens. That’s a concern. I guess the authentic may use Delrin
Unfortunately clone makers often lie about material. All of a sudden everything is 316 but rusts. Plastic is Delrin. Plastic is pei or peak. When it melts.
Quite fortunately when using the clr adaptor this isn’t really an issue and the tank is otistanding for that.
It’s a shame that when 3f gets good clones they get one run and it’s over. But he time word gets around you can’t get them any more.
There has been no micro chamber released but my guess is the authentic part fits and solves the material issue.
The authentic pico is amazing,y overpriced. Especially when you add all the parts. This tank has been great with clr coils. But I worry about the plastic if I use the build deck as shown above. A friend noted very strange flavor with it and I don’t trust clone plastic that close to a coil. They aren’t going to use high end costly material on a m,ass produced and super cheap item. Even though she tic is overpriced. It’s still got a much higher material cost.
The fact this rat is popuka enough to support the insane authentic price tells me the f,savor should be out if this world with the build deck shown. So to note strange or polluted flavor.
I wish there was a way to know what materials really are because I don’t fee, we get the honest truth. I have no problem buying 304 stain,was devjces. Food grade is perfectly fine. But a bunch of people who don’t understand material think everything has to be the highest grade. She. The reality is often the higher grades carry their own issues.
3f you should endeavor to analyze and post materials used and confirm. It would set you apart to show you care about what your clients are vaping.