29 Comments

  1. 3Fvape Coupon Codes

    its been awesome using 3Fvape products.

    Reply
  2. Mohd Adib bin Muhamat

    Hye there.
    How can i get this tank?
    Can u post it to Malaysia?

    Reply
  3. westside vapors

    what is the material of the coil deck wall and chimney?

    Reply
  4. eez

    hye there, where do you buy the authentic pico? thanks.

    any vapor and flavor differences between 3F and the authentic pico?

    Reply
  5. Edward

    The one part not shown is the one that’s clearly way off. The clr adaptor top. It isn’t long enough. Clearly the clr top chimney adaptor was not clones properly.

    Reply
    1. 3FVape 3FVape

      Thank you for your information, I haven’t test the clr adaptor when using it. Will update if I have the information confirmed.

      Reply
      1. Farhan

        Hello, May I know how to fix leaking juice inside my air hole?
        I’ve been experiencing 3 times of leaking juice and I have’nt had any ideas how to fix it

        Reply
        1. 3FVape 3FVape

          Try replace the o-ring to see if it helps.

          Reply
  6. dj

    Bought 1 from a local vendor.. vapes fine but it always leak on me.. both from airholes and 510 pins.. need help.. i really love this atomizer but it keeps on leaking..

    Reply
    1. 3FVape 3FVape

      Rebuild the coil. Use the cotton to block the oil leading hole. try if any o-ring can help.

      Reply
  7. purbo

    I have pico-s tank, but it always leaking everywhere trough airhole in the bottom, any advice to fix this?
    My local store told me the different (if pico has chamber hole at the top, but the pico-s has chamber hole on bottom, and the top chamber does not screw model, it just with seal with o-ring)
    iam very desparate right now.. i try to give the hole chamber full off cotton to block the liquid but, still leaking.. pls help me guys…

    Reply
    1. 3FVape 3FVape

      Try to change the o-rings on the building deck.
      Block the filling hole when filling.
      Didn’t try pico-s, not much to help. sorry.

      Reply
      1. purbo

        thanks for the advise, i will check all the o-ring first, couse i think all o-ring has been tide at the tank.. thank you.. sorry if my english are bad

        Reply
        1. 3FVape 3FVape

          You are welcome.
          English is not my first language too.

          Reply
  8. Mike

    Can the clone parts be used on an authentic pico?

    Reply
  9. Jon Jensen

    Which manufacturer makes this clone?
    And why is it unavailable now?

    Reply
  10. Jon Jensen

    Which manufacturer makes this clone?
    Why has it become unavailable ?
    Will it be back in stock ever?

    Reply
    1. 3FVape 3FVape

      The demand doesn’t meet the MOQ of this manufacturer and they are now manufacturing new items so the possibility this item back to stock is small.
      Thank you.

      Reply
      1. Rockstar

        This happens way too much. You need to tell the manufacturers it takes time for the word to get out. If you got these back in I’d buy two and have three friends who would buy ten between them. They can’t expect everyone to learn there’s a good clone so quickly. Too many bad clones now makes people less likely to buy right away until user reviews come in. Right now by the time good user reviews come in they don’t make it any more.

        Reply
  11. serg

    please tell me, this product pico 3FVape will be in your presence? if yes, then when ? really I want to buy it

    Reply
    1. 3FVape 3FVape

      You can subscribe the notification. Once it’s in presence you will get a email notification.

      Reply
  12. serg

    please tell me, this product pico 3FVape will be in your presence? if yes, then when ? really I want to buy it )

    Reply
    1. 3FVape 3FVape

      So far out of stock, you can subscribe the notification. Once it’s in presence you will get a email notification.

      Reply
  13. Rockstar

    The find ring thing here is the authentic tic probably uses heat resistant material for the surround on the deck. The d,one probably uses bog standard cheap plastic with all kind of carcinogens. That’s a concern. I guess the authentic may use Delrin

    Unfortunately clone makers often lie about material. All of a sudden everything is 316 but rusts. Plastic is Delrin. Plastic is pei or peak. When it melts.

    Quite fortunately when using the clr adaptor this isn’t really an issue and the tank is otistanding for that.

    It’s a shame that when 3f gets good clones they get one run and it’s over. But he time word gets around you can’t get them any more.

    There has been no micro chamber released but my guess is the authentic part fits and solves the material issue.

    The authentic pico is amazing,y overpriced. Especially when you add all the parts. This tank has been great with clr coils. But I worry about the plastic if I use the build deck as shown above. A friend noted very strange flavor with it and I don’t trust clone plastic that close to a coil. They aren’t going to use high end costly material on a m,ass produced and super cheap item. Even though she tic is overpriced. It’s still got a much higher material cost.

    The fact this rat is popuka enough to support the insane authentic price tells me the f,savor should be out if this world with the build deck shown. So to note strange or polluted flavor.

    I wish there was a way to know what materials really are because I don’t fee, we get the honest truth. I have no problem buying 304 stain,was devjces. Food grade is perfectly fine. But a bunch of people who don’t understand material think everything has to be the highest grade. She. The reality is often the higher grades carry their own issues.

    3f you should endeavor to analyze and post materials used and confirm. It would set you apart to show you care about what your clients are vaping.

    Reply

Leave a Reply to purbo Cancel reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>